id: "power-restoration-walkthrough" slug: "power-restoration-walkthrough" order: 99 title: "Power Restoration Walkthrough — Fixing the Machine Three Times" description: "Step-by-step walkthrough for all three power restoration sequences in The Incident at Galley House." keywords: ["power restoration walkthrough, fix machine, restore power, three times"] category: "walkthrough" date: "2026-07-15" lastModified: "2026-07-16" image: "/images/video-c1eqTmImVjM.webp" video: "c1eqTmImVjM"
Power Restoration Walkthrough — Fixing the Machine Three Times
The memory machine in The Incident at Galley House loses power three times during your investigation. Each power failure is a fixed story event that creates a natural breakpoint in the investigation, and each restoration requires a different approach. This walkthrough provides step-by-step guidance for all three power restorations, along with tips for what to do before and after each restoration to maximize your investigation efficiency.
Why the Machine Loses Power
The three power failures are not random — they are tied to story progression and the supernatural properties of Galley House. Each failure occurs at a specific narrative point, and the act of restoring power is thematically connected to the events you are investigating. The machine's power system mirrors the supernatural energy of Galley House itself, and understanding this connection is part of the meta-plot.
From a gameplay perspective, the power failures serve several purposes:
- Pacing — They create natural pauses where you can review what you have learned
- Progress gates — Each restoration unlocks a new batch of scenes from later in the timeline
- Thematic reinforcement — They remind you that the machine's connection to the past is not purely technological
- Investment — The effort of restoring power deepens your engagement with the investigation
First Power Restoration
When It Happens
The first power failure occurs relatively early in your investigation, after you have unlocked the initial set of scenes (approximately timestamps 01 through 06). You will notice the machine interface going dark with a clear visual and audio cue indicating power loss. The game makes it obvious that something has changed.
What to Do Before Restoring
Before restoring power, make sure you have:
- Entered all available low-timestamp codes (01-EN-1-11 through 06-DI-3-8-9)
- Labeled all discovered ground-floor locations (EN, LI, QU, ST, KI, DI)
- Used the keyword search tool on terms from recently viewed scenes
- Noted any character names or references you want to investigate further
Step-by-Step Restoration
-
Examine the machine's physical components — Look at the machine itself and the area immediately surrounding it. There are interactive elements you can manipulate: buttons, switches, and lights that have specific states.
-
Find the basic restart sequence — The first restoration is deliberately straightforward. The solution involves interacting with the machine's physical controls in a specific order. The game provides subtle visual hints about the correct sequence — pay attention to which lights are on and which are off.
-
Follow the visual cues — The machine's interface provides visual guidance about the correct procedure. Lights, buttons, and switches all have specific states that indicate what to do next. If a light is blinking, try interacting with the corresponding button. If a switch is in an unusual position, try toggling it.
-
Complete the sequence — Once you have performed the correct actions in order, the machine will power back on. You will see and hear a clear confirmation that power has been restored.
Achievement Earned
Restoring power for the first time earns the Machine Supervisor achievement. This is one of the earliest achievements most players earn and cannot be missed through normal story progression.
What Unlocks After
After the first restoration, you gain access to scenes with timestamps in the mid-range (approximately 07 through 14). These include the Billiard Room and Chapel scenes, the escalating tensions, and critically, the body discovery in the Attic (13-AT-1-4).
Second Power Restoration
When It Happens
The second power failure occurs after you have unlocked a significant number of scenes and are making progress on deductions. The narrative context around this failure is more complex than the first — by this point, you understand the stakes of the investigation and the escalating danger at Galley House.
What to Do Before Restoring
Before the second restoration, ensure you have:
- Viewed all mid-range scenes (07 through 14), especially the body discovery
- Attempted to identify at least 3-4 characters
- Used the keyword search tool with terms related to the body, death, and the Chapel
- Labeled any newly discovered locations (BI, CH, and upper-floor bedrooms)
Step-by-Step Restoration
-
Do not stay at the machine — Unlike the first failure, the solution to the second restoration is not found by manipulating the machine directly. You must explore your D&M environment.
-
Look for additional power resources — The D&M facility contains resources that can help restore the machine. These resources are referenced in earlier present-day scenes — characters discuss the machine's quirks and power needs. Pay attention to these conversations; they contain the clues you need.
-
Use information from previous scenes — Revisit the present-day scenes you have unlocked. Characters at D&M sometimes mention the machine's power requirements or alternative energy sources. The keyword search tool with terms like "power," "energy," and "restore" may reveal useful dialogue.
-
Apply the resources to the machine — Once you have found the correct resources and understood the procedure from scene clues, return to the machine and apply what you have learned. The second restoration is more involved than the first but follows a logical progression from the clues the game provides.
Achievement Earned
The second power restoration earns the Technical Engineer achievement. It also demonstrates that you have been paying attention to the present-day narrative, which is essential for the meta-plot.
What Unlocks After
The second restoration grants access to scenes from the later part of the night (approximately timestamps 15 through 22). These contain the deadly events, character confrontations, and critical information about character fates and causes of death.
Third Power Restoration
When It Happens
The third and final power failure occurs near the climax of the game. By this point, you should have a thorough understanding of the machine, its power system, and the supernatural forces at work. The restoration is the most complex and the most narratively significant.
What to Do Before Restoring
Before the third restoration, make sure you have:
- Viewed all available Part 1 scenes through timestamp 22
- Made significant progress on character identifications
- Unlocked and viewed Part 2 present-day scenes
- Used the keyword search tool extensively to find meta-plot connections
- Attempted at least a preliminary meta-plot deduction
Step-by-Step Restoration
-
Synthesize knowledge from both timelines — The solution to the third power failure requires information from both Part 1 and Part 2 scenes. Think about how the past events at Galley House relate to the machine's power system. The supernatural elements of the house are directly connected to the machine's ability to access memory echoes.
-
Consider the supernatural element — The machine's power is connected to the supernatural properties of Galley House. The third restoration involves acknowledging and working with this connection rather than treating the machine as purely mechanical. This is the point where the game's mystery and its mechanics converge.
-
Follow the narrative clues — By this point in the game, the story provides clear guidance about what needs to happen. Pay attention to the dialogue in recent scenes — both past and present — and follow the implications. The clues build on each other, and the correct approach emerges from synthesizing multiple sources of information.
-
Complete the restoration sequence — The third restoration is the most involved but also the most narratively satisfying. It ties directly into the game's climax and the resolution of the meta-plot. The sequence is longer than the first two but follows a clear logical path once you understand the underlying principles.
What Unlocks After
The third restoration reveals the latest scenes in the timeline, including the final events of the night (23 through 26) and the most important present-day revelations. These scenes contain the climactic information needed for the meta-plot deduction.
Troubleshooting Guide
I Cannot Figure Out the Restoration Sequence
If you are stuck on any power restoration:
- Rewatch the most recent present-day scenes for references to the machine's power system
- Use the keyword search tool with terms like "power," "restore," "machine," "energy," and "restart"
- Request a hint from the progressive hint system — it will point you toward the correct approach without spoiling the solution
- Check the environment around the machine for interactive elements you may have missed
- Revisit scenes where D&M employees discuss the machine's operation
The Machine Will Not Activate After I Complete What I Think Is the Correct Sequence
Double-check each element of the restoration. You may have missed a step or performed actions in the wrong order. Some restorations require a specific sequence — doing the correct actions in the wrong order will not work.
I Restored Power but Cannot Find New Scenes
After restoring power, new codes become valid that were not available before. Try incrementing timestamps from where you left off and using the new range of scene numbers. The scene codes list provides the complete reference for what is available after each restoration.
Power Restoration and the Meta-Plot
The machine's power system is not just a gameplay mechanic — it is thematically significant. Each power failure represents a deepening of your connection to Galley House and its supernatural properties. The act of restoring power re-establishes your link to the past, and each restoration is more difficult because it requires deeper understanding of the supernatural forces at work.
The three-fold structure mirrors the investigation itself: surface-level understanding leads to deeper insight, which leads to the ultimate revelation. Understanding this thematic connection makes the power restorations more than just puzzles — they are narrative milestones that mark your growing comprehension of the mystery.
For more details about the machine and its mechanics, see the power restoration guide and the memory machine origins. For the official game page, visit the Steam store.